Precautions for operation of tape slitting machine → | World-Packing

The widespread use of packing tape has attracted a number of investors. But how to avoid detours, of course, is to read more about the experience of others. As a pioneer in China packing tape industry, we decided to share our experience, and at the same time, we urge our peers to avoid vicious competition and maintain a good business competition.

Following as Notes on the operation of the packing tape slitter:

Before using the tape cutting machine, check whether the working positions are adjusted properly. The parts to be lubricated should be filled with grease in advance. At the same time, the cutter on the tape cutting machine should be kept sharp.
Before working, the tape slitter should also check whether the machine is abnormal and input the order to be processed into the computer order inspection in advance.
Before starting the tape cutting machine, the operator should first ensure that there are no other people around to avoid accidentally injuring other people.
Make sure the voltage, current and hydraulic pressure are normal before starting to ensure the safe and effective operation of the equipment.
During the operation of the tape slitting machine, in order to avoid the risk of personal injury caused by rolling your hands, you should be careful not to touch the film roll or roller core in operation with your hands.
When operating the tape slitting machine, be careful not to scratch or cut each roller core with a knife or hard object.
After the tape slitting machine is put into operation, the best working condition of the equipment should be adjusted in time according to the production situation, to ensure that the slitting machine’s indentation is moderate, the slitting is free of burrs, and the side trimming position is appropriate.
When the equipment is not in use, the equipment should be regularly cleaned and maintained to ensure that it can be used directly when the equipment is used next time. For example, if every part of the transmission chain and gears are short of oil, grease is injected; lubrication of the reducer, lubrication of the bushing and shaft on the take-up shaft, lubrication of the air source processor, or regular inspection of the screws of each part. It should be noted that during the maintenance of the tape cutting machine, do not use corrosive chemicals to wipe the embossing wheel, rubber wheel, and winding shaft.

The principle of tape slitting machine(China packing tape ):

The paper slitter needs to cut the whole roll or the whole raw material with a fixed length, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc., all of them must use fixed-length cutting control.
The cutting length can be set continuously. If there is an error in the actual cutting length, it is easy to calibrate by setting parameters.
The slitting control of the paper slitting machine is divided into static and dynamic slitting: when the set length is reached, the machine is stopped accurately, and then the static slitting is processed, and then restarted after the slitting; The cutting signal is issued when the machine stops, and the cutting machine dynamically cuts and processes during the movement of the material.

Hope you can find the above information can be of help.

Shenzhen World Packing Industrial Ltd

Stretch Film & Packing Tape Specialist , Top China manufacturer